Matching dial-peer based on calling number for outgoing calls

I had problem matching IP phone with FXO assigned to it.

There is no short nor fast way to configure it. What I found is as below:

1. Match calling number with translation profile

dial-peer voice 37 voip
 translation-profile incoming FXO_17
 answer-address 918852217

2.  Profile uses translation for called number

voice translation-profile FXO_17
 translate called 27

3. Translation changes prefix to unique for this action purpose

voice translation-rule 27
 rule 1 /^0/ /57/

4.Last action is to match specific prefixed extension with port in that case FXO

dial-peer voice 47 pots
 destination-pattern 57T
 translate-outgoing called 27
 port 0/2/3