Dial peer selection
2010/03/01 at 11:27 Leave a comment
Sometimes there is a need to configure more complicated configuration for incoming or outgouing calls. It’s good to remember what is an order of dial-peer’s selection by matching epcific elements. So it selects as below:
1. incoming called-address
2. answer-address
3. destination-pattern
4. voice-port
In the case of some issues start debug remembering that it is enough for gateway to match one of those elements.
Entry filed under: CCIE, cvoice. Tags: CCVP, dial-peer, gateway.
Trackback this post | Subscribe to the comments via RSS Feed